Safety Instructions - Mitsubishi Electric MR-J3-T Quick Start Manual

This Quick Start Manual for the servo amplifiers of the MR-J3-T series with point table positio-
ning is designed to enable you to get your system installed and configured for use as quickly as
possible. Please note that this guide only covers the basic functions with the instructions neces-
sary to use these functions. Complete descriptions of all the supported functions and all availa-
ble extensions can be found in the instruction manuals.
Please also note that the servo amplifiers of the MR-J3-T series include the following additional
major functions that are not covered in this Quick Start Manual:
b Communication via a serial port for controlling point table positioning
b Positioning control in BCD format with the optional MR-DS60 digital switch
b Amplifier controller circuit settings and auto-tuning functions

Safety Instructions

To ensure safe and proper installation of the equipment please also observe the instructions and
safety precautions in the instruction manuals supplied for your hardware.
Notes in this Quick Start Manual:
NOTE Tips and useful information.
Additional documentation:
b MR-J3-T Instruction Manual (SH(NA030061-A)
b MR-J3-T Instruction Manual for CC-Link (SH(NA030058-B)
b Instruction Manual for the CC-Link Master Module:
MR-J3-T
– QJ61BT11N
– A1SJ61BT11
– A1SJ61QBT11
– FX2N-16CCL-M
i