Adjusting The Delay Between The Picture And Sound; Enjoying Multiplex Broadcast Sound; Changing The Input Level Of The Sound From Connected Components - Sony DAV-DZ310 Operating Instructions Manual

To cancel the sleep timer
Press SLEEP repeatedly until "SLEEP OFF"
appears in the front panel display.
To set the sleep timer using the
system menu
1
Press SYSTEM MENU.
2
Press X/x to select "SLEEP," then
press or c.
The selected item appears in the front panel
display.
3
Press X/x to select a setting, then
press .
The minutes display (the remaining time)
changes by 10 minutes.
4
Press SYSTEM MENU.
Adjusting the Delay
Between the Picture and
Sound
[A/V SYNC]
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
1
Press DISPLAY.
2
Press X/x to select
then press .
3
Press X/x to select a setting, then
press .
• [OFF]: Off.
• [ON]: You can adjust the delay between
the picture and sound.
Note
• Depending on the input stream, [A/V SYNC] may not
be effective.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive a Dolby Digital signal, you need to
connect a TV or other component to the unit with a
digital optical cord* (page 30). If your TV is
compatible with the Audio Return Channel function
(page 59), you can receive a Dolby Digital signal via
an HDMI cable.
* DAV-DZ510/DAV-DZ610/DAV-DZ810 only.
Press AUDIO repeatedly to select the audio
signal.
The selected item appears in the front panel
display.
• "MAIN": Sound of the main language will be
output.
• "SUB": Sound of the sub language will be
output.
• "MAIN+SUB": Mixed sound of both the main
and sub languages will be output.
Changing the Input Level
of the Sound from
Connected Components
[A/V SYNC],
The sound distortion of the connected
component may be improved by reducing the
input level.
1
2
3
Press FUNCTION repeatedly to select
"TV" or "AUDIO IN."
The selected item appears in the front panel
display.
Press SYSTEM MENU.
Press X/x to select "ATTENUATE,"
then press or c.
67
GB