Adjusting The Delay Between The Picture And Sound (A/V Sync) - Sony HT-RD150 Operating Instructions Manual

Adjusting the Delay
Between the Picture and
Sound (A/V SYNC)
If picture and sound do not match, you can adjust
the delay between them.
AMP MENU
</M/m/,,
ENTER
1
Press AMP MENU repeatedly until the AMP
menu (page 24) appears in the centre unit
display.
2
Press M/m to select "CUSTOMIZE," and
press ENTER or ,.
3
Press M/m to select "A/V SYNC," and
press ENTER or ,.
"SYNC OFF" (default): Does not adjust.
"SYNC ON": Adjusts the delay between
picture and sound.
4
Press M/m to select "SYNC ON."
The A/V SYNC function is activated, and the
"A/V SYNC" indicator lights up in the centre
unit display.
5
Press ENTER or AMP MENU to turn off the
AMP menu.
To cancel the setting, repeat the above steps
and select "SYNC OFF" in step 4.
22
To return to the previous layer
Press <.
To operate the connected component after
setting
Select the component (input source) by pressing
DVD, VIDEO, or TUNER/BAND after turning
off the AMP menu.
Note
This function may not work depending on the input
stream, or the selected input source and the Sound Field
setting. When active, the "A/V SYNC" indicator lights
up in the centre unit display.