Download  Print this page

Sony DAV-DZ310 Operating Instructions Manual Page 62

Dvd home theatre system.
Hide thumbs

Advertisement

Table of Contents
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
Enjoying sound by the S-AIR
receiver while the main unit is
in standby mode
For the S-AIR receiver
You can receive the system's sound by the
S-AIR receiver while the main unit is in standby
mode by setting "S-AIR STBY" to "STBY ON."
1
Press SYSTEM MENU.
2
Press X/x to select "S-AIR STBY," then
press
The selected item appears in the front panel
display.
3
Press X/x to select the desired setting,
then press
• "STBY ON": You can receive the
system's sound by the S-AIR receiver
while the unit is in standby mode or turned
on.
• "STBY OFF": You cannot receive the
system's sound by the S-AIR receiver
while the unit is in standby mode.
4
Press SYSTEM MENU.
Note
• When you turn the system off while "S-AIR STBY"
is set to "STBY ON," "S-AIR" flashes (when
wireless transmission between the unit and S-AIR
receiver is not activated), or lights up (when wireless
transmission between the unit and S-AIR receiver is
activated) in the front panel display.
62
GB
or c.
.
Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)
For the surround amplifier
For the S-AIR receiver
When using S-AIR products, neighbors may
also receive your system's sound if IDs are the
same, or you may receive sound from neighbors.
To prevent this, you can identify the unit with a
specific S-AIR sub unit by performing the
pairing operation.
When you perform pairing, wireless
transmission is activated between the paired
main unit and S-AIR sub unit only.
1
Place the S-AIR sub unit that you want
to pair near the unit.
2
Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit, see "To set the ID
of the unit" (page 61).
• To set the ID of the surround amplifier,
refer to the operating instructions of the
surround amplifier.
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
3
Press SYSTEM MENU.
4
Press X/x to select "PAIRING," then
press
or c.
The selected item appears in the front panel
display.
5
After "START" appears in the front
panel display, press
The unit starts pairing and "SEARCH"
flashes in the front panel display.
To cancel pairing, press SYSTEM MENU.
6
Start pairing of the S-AIR sub unit.
x For the surround amplifier
Press "/1 on the surround amplifier to turn
on the surround amplifier and press
PAIRING on the rear panel of the surround
amplifier. (To press PAIRING, a slim
.

Advertisement

Table of Contents

This manual is also suitable for:

Dav-dz510Dav-dz610Dav-dz810

Comments to this Manuals

Symbols: 0
Latest comments: