Adjusting The Delay Between The Picture And Sound; Enjoying Multiplex Broadcast Sound (Audio) - Sony HT-A9 Operating Instructions Manual

C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
010COV.book Page 38 Wednesday, November 25, 2020 3:33 PM
Adjusting the Delay
Between the Picture and
Sound
When the sound does not match the
pictures on the TV screen, you can adjust
the delay between the picture and
sound.
The setting method differs depending
on the input.
For details, refer to Help Guide.
38
US
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the speaker system
receives a Dolby Digital multiplex
broadcast signal.
AUDIO
1
Press AUDIO repeatedly to select
the desired audio signal.
The audio signal appears
screen
.
Audio signal Explanation
[Audio: Sound of the main
Main] language is output.
[Audio: Sub] Sound of the sub
language is output.
[Audio: Main sound is output
Main/Sub] from the left speaker
and sub sound is
output from the right
speaker.
Notes
• To output Dolby Digital sound, you need
to connect a TV that is compatible with
eARC or ARC (page 16) to the HDMI OUT
(TV ARC/eARC) jack with the HDMI cable
(supplied), or other devices to the HDMI IN
jack with an HDMI cable (not supplied).
• The audio signal does not appear on the
TV screen while the TV input is selected. In
this case, you can check the audio signal
in the front panel display.
5-025-229-11(1)
masterpage: Left
on the TV
HT-A9