Remove the protection paper from the speaker-bottom cover, then attach the speaker-
bottom cover to the bottom of the upper part of the speaker.
• When removing the protection paper, pull it off via the section exposed by the notch in the speaker-bottom cover.
To hang the speaker on a wall
For DAV-DZ510, you can select the speaker hanging method.
• To hang the speakers directly on a wall in an upright position: see the following Steps.
• To hang the front and surround speakers on a wall at a desired angle by using the supplied wall
mounting parts: see "To install the front and surround speakers on a wall using the wall mounting
parts" (page 26).
Connect the speaker cord with the color tube to 3, and the speaker cord without the
color tube to #.
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
30 mm (1
Fasten the screws to the wall, then hang the speaker on the wall.
Depth of fastened screw
8 to 10 mm
Bottom of the upper part of
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
4 mm (
Hole on the back of