Samsung SDH-C74040 User Manual page 51

Remote Devices
You can set the RS-485 communication for use of PTZ Camera with the DVR.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Remote Device>, and press [ENTER] button.
2. Use direction buttons ( ◄ ►) to move to the desired
item, and press [ENTER] button.
3. Set the values of each communication setup of the remote
device.
• Baudrate : Baud rate settings of the DVR, PTZ camera
should be matched for proper operations.
4. Make sure to match IDs of the DVR and Remote Control,
and press <OK>.
For changing the remote control's ID, refer to "Changing the Remote Control ID". (Page 14)
M
Remote Device
Baudrate Parity Data Stop Bit
9600 None 8 1
Remote Control ON ID 0
OK Cancel
Transfer type
Half Duplex
English _51