Samsung SDH-C74040 User Manual page 14

overview
Using the numeric buttons
CHANNEL 1–9
CHANNEL 10
CHANNEL 11–16
Changing the Remote Control ID
1. Press the [ID] button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 0.
2. Enter 2 digits of your selection in order, while pressing the system [ID] button.
3. When ID input is done, press the system [ID] button again to check the setting.
If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.
M
Remote control's ID and DVR's ID should be matched for proper operation. Refer to "Remote Devices". (Page 51)
14_ overview
Press each button between 1 to 9. (8CH : 8)
Press the [0] button or press [+10] button first, then press the [0] button again within 3 seconds.
Press the [0/+10] button first, then press any number between 1 to 6.