Table of Contents
Advertisement
ANSWERING SYSTEM OPERATION
At Cordless Handset or Touch Tone Phone
Remote Access Commands
Playing Messages
1
Connect with the answering system.
2
After the two beeps, wait 4 seconds. The system plays back messages
in Mailbox 1
— OR—
Press and release 1, then enter a Mailbox number (1 or 2), to play all
messages in that mailbox
— OR —
Press and release 2, then enter a Mailbox number (1 or 2) to play only
new messages in that mailbox.
To repeat a message, press and release 4 while the message is
3
playing. Each time you press and release 4, the system backs up one
more message.
If you're calling from a touch tone phone that sends a continuous tone
when you hold down a button, you can repeat part of a message by
pressing and holding 4. Release 4 to resume playing.
To skip a message, press and release 6 while the message is playing.
Each time you press and release 6, the system advances one more
message.
If you're calling from a touch tone phone that sends a continuous tone
when you hold down a button, you can skip part of a message by
pressing and holding 6. Release 6 to resume playing.
To stop message playback, press 5.
To save messages, hang up.
To play messages in another mailbox
After playing messages in one mailbox, the system announces "End of
messages" and beeps twice. You can then press 1 (all messages) or 2
(new messages only) and enter the number of the other mailbox.
Deleting Messages
Connect with the answering system and begin playing messages.
To delete a selected message, press and release 3 while the message
is playing.
To delete all messages in a mailbox, after you listen to all messages in
the mailbox and hear "End of Messages", press 3 and then the mailbox
number.
24
7630_book.1AT&T
24
8/12/98, 6:29 PM
Advertisement
Table of Contents
