91-5431-10-00_ATT5870_R0JUN040
REMOTE ACCESS COMMANDS
FUNCTION:
Play messages
in a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
NOTE: If no key is pressed within 10 seconds of entering remote
access code, the voice menu will be announced. After the voice menu
announcement, if no key is pressed within 20 seconds, the remote
access call will automatically end.
2/5/03
4:03 PM
Page 59
COMMAND:
Press #, then enter the appropriate
mailbox number(1, 2, or 3). The system
plays new messages. If there are no new
messages, the system plays old messages.
Press # 4 while message is playing; Press#
4 twice back up another message.
Press # 6 while message is playing; each
press advances another message.
Press # 5.
Hang up.
Press # 9 while message is playing.
Press # 7; system plays announcement,
then beeps.
Press * 7; after beep, record
announcement, press # 5 to stop.
System plays back announcement.
Press * 8; then mailbox number where
you want memo recorded; speak after beep;
press # 5 to exit.
Press * 0.
Press # 0; the system announces, "Machine
off." Press # 0 again to turn the system
back on.
When system is off, it answers after 10 rings
and announces, "Please enter your remote
access code." Enter your remote access
code.
60