Checking And Cleaning The Print Head - Windows - Epson XP-432 Series User Manual

User's Guide
6. Compare the printed check pattern with the sample shown below.
❏ All lines are printed: The print head nozzles are not clogged. Select Finish Nozzle Check using the
button and press the OK button.
❏ There are broken lines or missing segments: The print head nozzles may be clogged. Go to the next step.
Note:
The test pattern may vary by model.
7. Select Head Cleaning using the
8. Follow the on-screen instructions to clean the print head.
9. When cleaning is finished, select Nozzle Check using the
instructions to print the nozzle check pattern again. Repeat cleaning and printing the pattern until all lines are
printed completely.
Related Information
"Loading Paper in the Rear Paper Feed" on page 19
&

Checking and Cleaning the Print Head - Windows

1. Load A4-size plain paper in the printer.
2. Access the printer driver window.
3. Click Nozzle Check on the Maintenance tab.
4. Follow the on-screen instructions.
Maintaining the Printer
u d
or button, and then press the OK button.
80
u d
or button, and then follow the on-screen
u d
or