Epson XP-302 Start Here

Start Here
EN
TC
安裝說明
© 2012 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX
Contents may vary by location.
Unpacking
內容物會因國家 / 地區而不同。
清點配件
1
! Cautions must be followed carefully to avoid bodily injury.
務必遵守注意說明，避免造成人身傷害。
Q
Do not open the ink cartridge package until you are ready to install it in the
printer. The cartridge is vacuum packed to maintain its reliability.
若不安裝至印表機，請勿拆開墨水匣的包裝。為了維持墨水匣列印穩定
性，墨水匣採真空包裝。
Remove all protective materials.
移除保護膠帶。
A
Turning On
開啟電源
2
Connect and plug in.
連接電源線並插入電源插座。
Q
Installing the Ink
Cartridges
For the initial setup, make sure you use the ink cartridges that came with this printer. These cartridges cannot be saved
for later use. The initial ink cartridges will be partly used to charge the print head. These cartridges may print fewer
安裝墨水匣
pages compared to subsequent ink cartridges.
初次安裝時，務必使用本印表機隨附的墨水匣。這些墨水匣無法保存供日後使用。內附的墨水匣，其中有部分墨
水會用在印字頭墨水設定上。這些墨水匣的列印頁數可能少於其後安裝的墨水匣。
3
A B
Open. Shake only BLACK new cartridge.
打開印表機上蓋。 僅限搖晃新的黑色墨水匣。請勿搖晃其他彩色墨水匣。
D
Insert all four cartridges. Press each one until it clicks.
安裝 4 顆墨水匣，直到卡入為止。
B C
Turn on. Select a language.
開啟電源。 選擇語言。
C
Do not shake other color cartridges. Remove yellow tape.
只撕下黃色標籤。
E F
Close. Press.
闔上印表機上蓋。 按下。