Maintaining The Printer; Checking And Cleaning The Print Head; Checking And Cleaning The Print Head - Control Panel - Epson XP-432 Series User Manual

User's Guide

Maintaining the Printer

Checking and Cleaning the Print Head

If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When
print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are
clogged, clean the print head.
Important:
c
Do not open the scanner unit or turn off the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
Note:
❏ Because print head cleaning uses some ink, clean the print head only if quality declines.
❏ When ink is low, you may not be able to clean the print head. Replace the ink cartridge first.
❏ If print quality has not improved after repeating nozzle check and head cleaning about four times, wait for at least six
hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend to
turn off the printer. If print quality has still not improved, contact Epson support.
❏ To prevent the print head from drying out, always turn the printer off by pressing the
❏ To keep the print head operating at its best, we recommend printing a few pages on a regular basis.

Checking and Cleaning the Print Head - Control Panel

1. Load A4-size plain paper in the printer.
2. Enter Setup from the home screen using the
3. Select Maintenance using the
4. Select Nozzle Check using the
5. Follow the on-screen instructions to print the nozzle check pattern.
Maintaining the Printer
l r
or button, and then press the OK button.
u d
or button, and then press the OK button.
u d
or button, and then press the OK button.
79
P
button.