gledhill BMA 200 SP-SOL Installation & Servicing Instructions Manual page 5

F&E cistern
BoilerMate A-Class
The minimum clear
opening in front of
the appliance to be
Maintenance
at least the same as
the depth of the
appliance
plus 50mm.
*If the F&E cistern is
fitted with a ballvalve,
this dimension will
need to increase to
350mm to comply with
the Water Regulations.
*Minimum access /
maintenance access
above the appliance
B
case.
SP SOL
E
The cupboard door
opening will need to
take into account the
access
various sizes of
appliances.
Page 5
Appliance Dimensions
Model
BMA 200-SP SOL
BMA 220-SP SOL
BMA 240-SP SOL
BMA 260-SP SOL
BMA 280-SP SOL
BMA 300-SP SOL
The above dimensions are for the appliance
only and do not include the 100mm high
installation base.
Minimum Cupboard Dimensions
Model
BMA 200-SP SOL
BMA 220-SP SOL
BMA 240-SP SOL
BMA 260-SP SOL
BMA 280-SP SOL
BMA 300-SP SOL
The above dimensions include the 100mm
high installation base and allow space for
installation/maintenance of the appliance only.
The height shown for the 200-220 models also
allows for the installation of the F&E cistern (with
no ballvalve) as shown opposite.
Note: With the 240-300 models, additional space
will be required for two feed and expansion
cisterns (each 280mm wide x 420mm deep x
300 high). This is NOT included in the minimum
cupboard dimensions shown above. Access
and maintenance space will also be required
for these cisterns.
Options at Extra Cost
• Hot and cold water manifolds for use with
plastic pipework.
• Scale inhibitor for mains water services with
hardness levels above 200ppm (mg/l).
• Ballvalve/overflow connector for automatic
fill model.
• Primary sealed system kit for fitting near
boiler comprising:
- Expansion vessel (size varies with model)
- 15mm 3 bar pressure relief (safety) valve
- Pressure gauge and filling loop
Figure 1.2
DESIGN
Height Width Depth
(A) (B) (C)
1330 560 620
1330 560 620
1575 560 620
1575 610 670
1575 640 700
1485 710 770
Height Width Depth
(D) (E) (F)
1980 660 630
1980 660 630
2175 660 630
2175 710 680
2175 740 710
2085 810 780