Lcd; Lcd Contrast; Mode Timer (Mfc Models Only) - Brother DCP-T300 Advanced User's Manual

Chapter 1

LCD

LCD Contrast

If you are having difficulty reading the LCD,
try changing the contrast setting.
(MFC-T800W)
a
Press Menu, 2, 5.
b
Press a or b to choose Light or Dark.
Press OK.
c
Press Stop/Exit.
(DCP-T300, DCP-T500W and DCP-T700W)
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
2
Mode Timer
1
(MFC models only)
1
The machine's control panel has three
temporary mode keys: FAX, SCAN and
COPY. You can change the amount of time
the machine takes after the last SCAN or
COPY operation before it returns to FAX
1
mode. If you choose Off, the machine stays
in the mode you used last.
1
a
Press Menu, 2, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.
1