Cleaning The Paper Pick-Up Rollers - Brother DCP-T300 Advanced User's Manual

Cleaning the paper pick-up
rollers
a
Unplug the machine from the electrical
socket.
b
Pull the paper tray completely out of the
machine.
NOTE
If the machine has been feeding multiple
pages when there are only a few sheets of
paper left in the tray, clean the Base
Pad (1) with a soft lint-free cloth slightly
moistened with water.
After cleaning, wipe the pad with a dry,
soft lint-free cloth to remove all moisture.
1
c
Open the Jam Clear Cover (1) at the
back of the machine.
1
d
Clean the Paper Pick-up Rollers (1) with
a soft lint-free cloth slightly moistened
with water.
A
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
1
e
Close the Jam Clear Cover.
Make sure the cover is closed
completely.
f
Put the paper tray firmly back in the
machine.
g
Re-connect the power cord.
Routine maintenance
27
A