Additional Sending Operations; Sending A Fax Manually - Brother DCP-T300 Advanced User's Manual

Chapter 3
c
Press Fax Auto/Manual then a or b to
choose the resolution.
Press OK.
d
Enter the fax number.
e
Press Mono Start.
To change the default fax resolution
a
Load your document.
b
Press (FAX).
c
Press Menu, 3, 2, 1.
d
Press a or b to choose the resolution
you want.
Press OK.
e
Press 2 so you can continue sending
your fax.
f
Enter the fax number.
g
Press Mono Start.
NOTE
You can choose four different resolution
settings for faxes.
Options
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than
Fine resolution.
Use when the document has
Photo
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
6
Additional sending
operations

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
3
sending a fax.
NOTE
To send a multi-page fax, use the ADF.
a
Load your document.
b
Press
c
To listen for a dial tone, press Hook.
d
Dial the fax number.
e
When you hear the fax tones, press
Mono Start.
Press 1 when you select the Fax Mode
to Advanced Mode and send the fax
from the scanner glass.
(FAX).
3
3