1.8" Touchscreen Lcd - Brother MCF-J285DW Basic User's Manual

Chapter 1
3
The WiFi light is on when the network interface
is set to WLAN.
4 Power On/Off
Press to turn on the machine.
Press and hold down
machine. The Touchscreen LCD will show
Shutting Down and will stay on for a few
seconds before turning itself off.
If you have connected an external telephone or
TAD, it is always available.
If you turn off the machine using
periodically clean the print head to maintain
print quality. To prolong the life of the print
head, provide better ink efficiency and maintain
print quality, you should keep your machine
connected to the power at all times.

1.8" Touchscreen LCD

The Touchscreen LCD shows the machine's
status when the machine is idle.
1 2
5
9 8
6
8
to turn off the
, it will still
1
3
4
7
1 Ink
Lets you see the available ink volume. Also,
lets you access the Ink menu.
will not appear if received faxes are in
the memory.
2 Fax
Lets you access Fax mode.
3 Copy
Lets you access Copy mode.
4 Settings
Lets you access the full Settings menu.
5 Scan
Lets you access Scan mode.
6 Web
Lets you connect the Brother machine to an
Internet service when you press t, and then
press .
For more information, see Web Connect
Guide.
7 Receive Mode
See the current Receive Mode:
Fax (Fax Only)

 F/T (Fax/Tel)
 TAD (External TAD)
Mnl (Manual)

8 Wireless Status
A four-level indicator on the Ready mode
screen shows the current wireless signal
strength if you are using a wireless connection.
0
If you see at the top of the screen, you
can easily configure the wireless settings by
pressing it. For more information, see Quick
Setup Guide.
Max