Overseas Mode; Checking And Cancelling Waiting Jobs - Brother DCP-T300 Advanced User's Manual

Sending in real time for the next fax
only
a
Press (FAX).
b
Press Menu, 3, 2, 3.
c
Press a or b to choose
Next Fax Only. Press OK.
d
Press a or b to choose Next Fax:Off
or Next Fax:On.
e
Press OK.
f
Press 2 so you can continue sending
your fax.
g
Load your document.
h
Enter the fax number.
i
Press Mono Start.
NOTE
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
• If the memory is full, faxes from the
scanner glass cannot be sent until you
clear some of the memory.
Sending a fax (MFC models only)

Overseas Mode

3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on Overseas Mode. After you send a fax
using this feature, the feature will
automatically turn itself off.
a
Load your document.
b
Press
c
Press Menu, 3, 2, 4.
d
Press a or b to choose On (or Off).
Press OK.
e
Press 2 so you can continue sending
your fax.
f
Enter the fax number.
g
Press Mono Start.
Checking and cancelling
waiting jobs
You can check which jobs are still waiting in
the memory to be sent, or cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
a
Press Menu, 3, 5.
Any waiting jobs appear on the LCD.
b
Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
c
Do one of the following:
 Press 1 to cancel it.
 Press 2 to exit without cancelling.
d
Repeat steps b and c for each job you
want to cancel.
e
When you have finished, press
Stop/Exit.
(FAX).
3
3
3
9