Sending A Fax At The End Of A Conversation; Broadcasting - Brother DCP-T300 Advanced User's Manual

Sending a fax at the end of a
conversation
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press (FAX).
d
Press Mono Start.
If you are using the scanner glass,

press 1 to send a fax.
(When you select the Fax Mode to
Advanced Mode)
e
Replace the handset of the external
phone.
Sending a fax (MFC models only)

Broadcasting

3
Broadcasting is automatically sending the
same fax message to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast
Speed Dial numbers must be stored in the
machine's memory before they can be used
in a broadcast. (See Basic User's Guide:
Storing Speed Dial numbers.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Speed Dial numbers for easier dialling.
(See Setting up Groups for Broadcasting
on page 14.)
How to broadcast a fax
a
Load your document.
b
Press
c
Enter a number.
Press OK.
You can use either a Speed Dial, a
Group or a manually entered number
using the dial pad.
d
Repeat step c until you have entered
all the fax numbers to be included in the
broadcast.
(FAX).
3
3
3
3
7