Ber (Tin) - SMART 2016 fortwo Owner's Manual

All about wheels and tires
186
Rubber Association of Canada (RAC)
regarding the tire traction on snow. They
have been especially developed for driving
on snow.
An electronic speed limiter prevents your
vehicle from exceeding a speed of 130 mph
(210 km/h).
The speed rating of tires mounted at the fac-
tory may be higher than the maximum speed
that the electronic speed limiter permits.
Make sure that your tires have the required
speed rating, e.g. when buying new tires. The
required speed rating for your vehicle can be
found in the "Tires" section (
Further information about reading tire data
can be obtained from any qualified special-
ist workshop.
Load index
In addition to the load-bearing index, load
rating : may also be imprinted on the side-
wall of the tire. This is located after the let-
ters that identify the speed rating
( page 184).
Y
If no specification is given: no text (as in
R
the example above), represents a standard
load (SL) tire
XL or Extra Load: represents a reinforced
R
tire
Light Load: represents a light load tire
R
C, D, E: represents a load range that
R
depends on the maximum load that the tire
can carry at a certain pressure
i
Tire data is vehicle-specific and may
deviate from the data in the example.
Maximum load rating
page 193).
Y
Maximum tire load : is the maximum per-
missible weight for which the tire is
approved.
Do not overload the tires by exceeding the
specified load limit. The maximum permis-
sible load can be found on the vehicle's Tire
and Loading Information placard on the
B-pillar on the driver's side (
i
The actual values for tires are vehicle-
specific and may deviate from the values in
the illustration.
DOT, Tire Identification Number (TIN)
U.S tire regulations prescribe that every tire
manufacturer or retreader must imprint a TIN
in or on the sidewall of every tire produced.
The TIN is a unique identification number.
The TIN enables the tire manufacturers or
retreaders to inform purchasers of recalls
and other safety-relevant matters. It makes it
possible for the purchaser to easily identify
the affected tires.
The TIN is made up of manufacturer identi-
fication code ;, tire size =, tire type
code ? and manufacturing date A.
page 179).
Y