Display - SMART 2016 fortwo Owner's Manual

Care
154
cleaning agent, e.g. smart car shampoo or
cleaning cloths.
Cleaning the sensors
!
If you clean the sensors with a power
washer, make sure that you keep a distance
of at least 11.8 in (30 cm) between the vehi-
cle and the power washer nozzle. Informa-
tion about the correct distance is availa-
ble from the equipment manufacturer.
Clean sensors : of the driving systems
X
with water, car shampoo and a soft cloth.
Cleaning the exhaust pipe
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
pipe by cleaning it regularly, especially in
winter and after washing.
!
Do not clean the exhaust pipe with acid-
based cleaning agents, such as bathroom
cleaner or wheel cleaner.
Clean the exhaust pipe with a care product
X
tested and approved by smart.
Interior care
Cleaning the display
!
For cleaning, do not use any of the fol-
lowing:
alcohol-based thinner or gasoline
R
abrasive cleaning agents
R
commercially-available household
R
cleaning agents
These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to irrepar-
able damage to the display.
Before cleaning the display, make sure that
X
it is switched off and has cooled down.
Clean the display surface using a commer-
X
cially available microfiber cloth and TFT/
LCD display cleaner.
Dry the display surface using a dry micro-
X
fiber cloth.
Cleaning the plastic trim
G
WARNING
Care products and cleaning agents contain-
ing solvents cause surfaces in the cockpit
to become porous. As a result, plastic parts
may come loose in the event of air bag
deployment. There is a risk of injury.
Do not use any care products and cleaning
agents to clean the cockpit.
!
Do not affix the following to plastic sur-
faces:
stickers
R
films
R
scented oil bottles or similar items
R
You can otherwise damage the plastic.
!
Do not allow cosmetics, insect repellent
or sunscreen to come into contact with the
plastic trim. This maintains the high-
quality look of the surfaces.