Opening/Closing - SMART 2016 fortwo Owner's Manual

Side windows
60
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
G
WARNING
If you close a side window again immedi-
ately after it has been blocked or reset, the
side window closes with increased or max-
imum force. The reversing feature is then
not active. Parts of the body could be trap-
ped in the closing area in the process. This
poses an increased risk of injury or even
fatal injury.
Make sure that no parts of the body are in
the closing area. To stop the closing proc-
ess, release the switch or push the switch
again to reopen the side window.
Opening or closing the side window
The switches for both side windows are loca-
ted on the driver's door. There is also a
switch for the front-passenger side window
on the front-passenger door.
The switch on the driver's door takes prece-
dence.
Left
:
Right
;
Turn the key to position 1 or 2 in the igni-
X
tion lock.
To open manually: press and hold the cor-
X
responding button.
To open fully: press the button beyond the
X
point of resistance and release it.
Automatic closing is started.
To close manually: pull the corresponding
X
button and hold it.
Vehicles with convenience control:
X
To close fully: pull the button beyond the
point of resistance and release it.
Automatic closing is started.
To interrupt automatic opening/closing:
X
press/pull the corresponding switch
again.
i
If you press the switch beyond the point of
resistance while opening, automatic oper-
ation is started. In vehicles with conveni-
ence control, you can also start automatic
operation when closing. To do so, pull the
switch beyond the point of resistance.
You can stop automatic operation by oper-
ating the switch again.
i
You can continue to operate the side win-
dows after turning the key to position 0 in
the ignition lock or removing the key. This
function remains active for 3 minutes or
until you open a door.
Resetting the side window
You must reset each side window if:
the side window opens again slightly after
R
being closed fully.
the side window can no longer be fully
R
opened or closed.
Close all the doors.
X
Turn the SmartKey to position 2 in the igni-
X
tion lock.
Pull the corresponding switch on the door
X
control panel until the side window is com-
pletely closed ( page 60).
Y
Hold the switch for an additional second.
X
If the side window opens again slightly:
Immediately pull the corresponding switch
X
on the door control panel until the side
window is completely closed (
Hold the switch for an additional second.
X
If the respective side window remains
X
closed after the button is released, then it
has been set correctly. If this is not the
case, repeat the steps above again.
page 60).
Y