Timing Recording; Motion Detection Recording - Optiview DVR4Lite Manual

Stop timing recording To stop timing recording, press [Timing] button on remote controller first. If password
protection is enabled, the "Input PWD" dialogue box popup. (Default password: 88888888) Enter valid password to stop
timing recording. The timing symbol in the image will also disappear. If password protection is disabled, press [Timing]
button to stop timing recording directly.
 Prompt: Manual recording will be invalid in timing recording process. Timing recording will be saved in hard disk
as alarm recording.

7.3 Motion detection recording

In monitoring status, it can detect removable objects. By analysis of the video, it detect whether the monitoring scene is
changed. If it changes, user can do something to deal with it according to setting this function. Motion detection work by
analysis of the video pixel changes. Light change or big video signal interference will also be regarded as monitoring
object moving, which will affect the motion detection. So it needs to set the parameter considering all the aspects, and try
to get the best effect. From "Menu"-> "Live config", enter into motion detection setting.
Step 1: Select channel
Enter "Live Config" interface. Move cursor to "Channel" to select the image to perform motion detection setting. Press
[Menu] to confirm.
Step 2: Activate motion detection
Press [Menu] key to select "Motion detection" to activate mask alarm.
Page 15/28