Ricoh 2238c Operating Instructions Manual page 98

Using the Network Delivery Scanner Function
Manual entry of a destination
Note
❒ When using ScanRouter V2 Pro-
fessional, it is possible to enter
the destination e-mail address
directly. In advance, you must
make settings for sending e-
mail with ScanRouter V2 Pro-
fessional.
A Press [Manual Input].
The soft keyboard is displayed
for entering a destination (e-
mail address).
B Enter the destination.
Note
❒ Enter the e-mail address of
the destination when send-
ing via the delivery server.
❒ It is possible to use letters,
numbers, and periods. The
7
symbols ()\,;:" cannot be
used.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
C Press [OK].
D To enter more destinations, re-
peat steps A A A A to C C C C .
Note
❒ To deselect a destination,
press [U U U U Prev.] or [T T T T Next] to
display the destination in the
destination field, and then
press the { { { { Clear/Stop} } } } key.
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
90
Checking selected destinations
A Use the destination field at the
top of the scree n to check
which destinations are select-
ed.
Note
❒ When multiple destinations
are selected, the selected des-
tinations are displayed in the
order they were selected by
pressing [U U U U Prev.] or [T T T T Next].
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
G G G G
Specify the scan file sender if nec-
essary.
To specify a sender, you can select
the sender from the list, enter the
five-digit registration number of
the sender with the number keys,
and search for the sender and se-
lecting it.
Note
❒ When a sender has been speci-
fied, this information is added
to the scan file. Select a sender
from the senders programed in
the delivery server.