Ricoh 2238c Operating Instructions Manual page 76

Sending Scan File by Scan to Folder
When selecting a sender from the
list
A Press [Attach Sender's Name].
B Select the sender.
5
Note
❒ When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
C Press [OK].
Using a registration number to
specify a sender name
A Press [Attach Sender's Name].
68
B Use the number keys to enter
th e f iv e-d igit registration
number that has been assigned
to a sender.
If the entered number is less
than five digits long, press the
{ { { { #} } } } key after the last number.
Example: To enter 00002
Press the { { { { 2} } } } key, and then
press the { { { { #} } } } key.
Note
❒ When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name
and [Return Receipt] are dis-
played.
C Press [OK].
Searching to select a sender
A Press [Attach Sender's Name].
B Press [
].