Ricoh 2238c Operating Instructions Manual page 115

Message
Exceeded max. No. of search results
which can be displayed.
Max.: nnn
Note
❒ "nnn" in the message represents changeable
number.
Exceeded max. number of alphanumeric
characters.
Exceeded max. number of alphanumeric
characters for the path.
Exceeded max. number of files which
can be sent at the same time. Reduce
the number of the selected files.
Exceeded max. number of files which
can be used in Document Server at the
same time.
Exceeded max. number of pages per
file. Do you want to store the scanned
pages as 1 file?
Exceeded max. number of standby files.
Try again after the current file is
sent.
Exceeded max. number of stored files.
Cannot send the scanned data as cap-
turing files is unavailable.
Exceeded max. page capacity per file.
Press [Send] to send the scanned data,
or press [Cancel] to delete.
Exceeded time limit for LDAP server
search. Check the server status.
Causes and solutions
Search again after changing the
search conditions.
Make sure the maximum number of
characters which can be entered, and
then enter it again.
The maximum number of characters
which can be entered for path is 128.
Check the number of character you
entered, and then enter it again.
The number of files exceeded the
maximum number possible. Reduce
the number of files and send them
again.
Make sure the files stored by the oth-
er functions, and then delete un-
needed files.
The maximum number of pages per
file is 1000. Specify whether to use
the data or not. Scan the pages that
were not scanned and store them as
a new file.
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery function. Wait
until files have been sent.
The maximum number of files that
can be stored in Document Server is
2000. Reduce the number of files or
delete unneeded files.
Because the number of pages has
reached the maximum number that
can be sent, the data up to this point
is sent. Scan the remaining pages af-
ter transmission.
A network error has occurred and
connection has failed. Try the opera-
tion once more. If the message is still
shown, the network may be crowd-
ed.
Check the information of System Set-
tings.
Troubleshooting
9
107