Ricoh 2238c Operating Instructions Manual page 71

C To select more destination
folders, repeat step B B B B .
Note
❒ To deselect a destination,
press [U U U U Prev.] or [T T T T Next] to
display the destination in the
destination field, and then
press the { { { { Clear/Stop} } } } key.
Manual entry of a path for the
destination folder of the client
computers on the same network
A Press [Enter Destination].
B Press [SMB].
C Press [Manual Input] on the right
side of the path field.
The soft keyboard is displayed
for entering the path for the
folder.
D Enter the path for the folder.
Note
❒ This is an example of enter-
ing a pass to send to the fold-
er "user" of the computer
"desk01". \\desk01\user
❒ An IP address can be also en-
tered if you use the following
operating systems are availa-
ble: Windows 98/Me, Win-
dows XP, Windows 2000,
Windows NT 4.0.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
E Press [OK].
Sending Scan File by Scan to Folder
F If entering a user name to log
on is required, press [Manual In-
put] on the right side of the user
name field.
The soft keyboard is displayed
for entering the user name field.
G Enter the user name.
H Press [OK].
I If entering a password to log
on is required, press [Manual In-
put] on the right side of the
password field.
The soft keyboard is displayed
for entering a password.
J Enter a password.
K Press [OK].
L Press [Connection Test].
A connection test is performed
to check whether the specified
shared folder exists.
Note
❒ To change the path for the
folder that has been entered,
press [Change] located on the
left side of the destination
field. Enter a path for the
folder properly, and then
press [OK].
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
❒ The connection test some-
times takes time.
5
63