Ricoh 2238c Operating Instructions Manual page 75

Checking selected destinations
A Use the destination field at the
top of the screen to check
which destinations are select-
ed.
Note
❒ When multiple destinations
are selected, the selected des-
tinations are displayed in the
order they were selected by
pressing [U U U U Prev.] or [T T T T Next].
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
G G G G
Select the file type if necessary.
A Press [File Type].
B Select the file type of the file to
be sent from the displayed
types.
C Press [OK].
H H H H
Specify the file name of the file to
be sent if necessary.
A Press [File Type].
B Press [File Name].
The soft keyboard is displayed
for entering a file name.
C Enter a file name.
Sending Scan File by Scan to Folder
Note
❒ The scan file is given a 21-dig-
it (except the extension) file
name which combines the
time and date of scanning
originals with a 4-digit page
number. (Example : When
one page is scanned in TIFF at
15.10 seconds, 3.30 p.m., 31
December, 2003, the file name
is 200312311530150100001.tif)
D Press [OK].
E Press [OK].
I I I I
Select a sender if necessary.
To specify a sender, you can select
the sender from the list, enter the
five-digit registration number of
the sender with the number keys,
and search for the sender and se-
lecting it.
Note
❒ When the sender name is speci-
fied in this step, it is displayed
in the journal.
❒ To prevent misuse of a sender
name, we recommend you set a
protection code for that sender
name.
❒ Be sure to select or enter a send-
er name. Otherwise Key Opera-
tor's E-mail Address is used as
the sender name. See General
Settings Guide.
5
67