Assembly - Pro-Form J4 831.297060 User Manual

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver
Extension Leg Screw (53)Ð4
1. With the help of a second person, carefully lay the
treadmill on its right side. Insert one of the Extension
Legs (34) into the treadmill as shown. Make sure that
the Base Pad (40) is on the indicated side of the
Extension Leg. Attach the Extension Leg with an
Extension Leg Screw (53). Be sure to push on the
head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (34) as described
above.
With the help of a second person, carefully raise the
treadmill to the upright position so that both Extension
Legs (34) are resting flat on the floor.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of
injury, bend your legs and keep your back straight.
.
Latch Screw (35)Ð2
1
34
40
34
40
2
5
53
53