Ipad; Prerequisites; Connecting To Your System On An Ipad - FLIR DNR100 SERIES Instruction Manual

16 Connecting to your System Using Smartphone or Tablet Apps
To delete a system:
1. Tap the system you would like to delete.
2. Tap . Tap OK to confirm.

16.2 iPad

FLIR Cloud™ is an iPad app that allows you to remotely view your system.

16.2.1 Prerequisites

• The device you are connecting to must be connected to the Internet.
• Port 80 and 35000 (or your HTTP and Client Ports, if you have changed them) must be
port forwarded to your router.
• You must create a DDNS account, and have the DDNS settings configured in your NVR
or IP camera. For more information on DDNS, see 14.3 DDNS Setup—Access your
System Remotely over the Internet, page 58.
NOTE
For the latest list of supported apps and devices, visit .
NOTE
The app will ask for permission to send push notifications and to access Photos. It will only send notifi-
cations if you enable motion-activated push notifications in the Push Config menu. It needs access to
Photos to save snapshots and video clips to the local storage on your mobile device.

16.2.2 Connecting to your system on an iPad

1. Install FLIR Cloud™ for free from the App Store.
2. Tap on the FLIR Cloud™ icon (
3. Tap then .
4. Tap Device Manager.
#; r. 2.0/23313/23313; en-US
) to start the app.
102