USE OF MANUAL UNLOCKING
Fig.7
RELEASE INSTRUCTIONS
In case of fault or power failure, open the removable door and unlock the pinion gear by turning the pinion
gear pin counter clockwise by means of the provided tool. This allows moving the gate manually. Attention:
perform locking and lock release operations with motor cut off.
LOCK INSTRUCTIONS
To lock the geared motor, rotate the pinion clockwise, strongly tighten, and re-close the removable door
.
ADJUSTING THE CLUTCH
Fig. 8
Adjust the clutch as per fig.8.
IF THE GEARMOTOR IS PROVIDED WITH THE QK-CE220RLINV CONTROL BOARD THE CLUTCH
CAN BE DISACTIVATED BY TIGHTENING THE BOLT COMPLETELY