ADJ INNO POCKET Z4 User Instructions page 16

Hide thumbs Also See for INNO POCKET Z4:
Table of Contents

Advertisement

Inno Pocket Z4
again. Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program.
1. Press the MENU button until "TEST" is displayed, press
ENTER.
2. The fixture will now run a self test.
MANU
- In this submenu you are able to test the different
functions; pan, tilt, LEDs, zoom, dimmer, and strobe.
1. Press the MENU button until "MANU" is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until "TEMP" is displayed, press
ENTER.
2. The fixture temperature will now be displayed. Press MENU
to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until "FHRS" is displayed, press
ENTER.
ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 15
System Menu
Inno Pocket Z4
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until "VER" is displayed,
press ENTER.
2. The display will show the software version.
RSET
- Use this function to reset the unit.
1. Press the MENU button until "RSET" is displayed, press
ENTER.
2. The fixture will now reset.
BALA
- With this function you can adjust the RGB colors
to make your desired color.
1. Press the MENU button until "BALA" is displayed, press
ENTER.
2. Use the UP or DOWN buttons to find the color you wish to
adjust.
3. Once you find the color you want to adjust press ENTER, the
displayed value will begin to flash. Use the UP or DOWN but-
tons to adjust the value. Once you have made your adjustment
press ENTER.
4. Repeat steps 2-3 until satisfied.
ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 16
System Menu

Advertisement

Table of Contents
loading

Table of Contents