Page 2
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and Inspect Frame Bi-Annually passage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs. Clean Machine As Needed...
Page 3
It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use. DEATH OR SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT.
Page 4
PEC FLY REAR DELT • PEC FLY REAR DELT • Adjust start position overhead for pec fly or rear delt movement REAR Adjust seat height to align handles with middle of chest DELT...
Page 5
4MM L-Shaped Allen Wrench Phillips Screwdriver 5MM L-Shaped Allen Wrench 8MM Open-End Wrench 6MM L-Shaped Allen Wrench 17MM Open-End Wrench 8MM L-Shaped Allen Wrench Guide Rod Lubrication If any items are missing please contact your country’s local MATRIX dealer for assistance.
Page 6
Be sure to remove the insulating sheet Step 1 Hardware when installing the rep counter. Description Bolt (M10x80L) Spring Washer (Φ10.2) Washer (Φ10.2) Nylock Nut (M10) Plug Do not fully tighten frame connectors until assembly is complete. Vibra-Tite 135 Red Gel or equivalent must be used on all fasteners that are not assembled with Nyloc Nuts.
Page 7
Leg Press G7-S33 Lat Pull-down G7-S42 Triceps Press G7-S34 Seated Row G7-S40 Bicep Curl G7-S74 Hip Adductor G7-S75 Hip Abductor G7-S22 Pec Fly/Rear Delt G7-S51 Abdominal Crunch G7-S52 Back Extension G7-S78 Glute G7-S55 Rotary Torso G7-S21 Lateral Raise G7-S73 Prone Leg Curl...
Need help?
Do you have a question about the G7-S22 and is the answer not in the manual?
Questions and answers