How to use the control panels of schilling gym equipment: treadmill, ascent trainer (elliptical), upright & recumbent bike and rowing machine (8 pages)
Clean Grips As Needed * Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX strength equipment. Please note, 0.91 meters (36”) Lubricate Guide Rods As Needed is the ADA recommended clearance width for individuals in wheelchairs.
6. Check to see that the selector pin is completely inserted into the weight stack. Thank you for purchasing a MATRIX Fitness product. It is inspected before it is 7. NEVER use the machine with the weight stack 2. SECURING EQUIPMENT: Manufacturer recommends that all pinned in an elevated position.
Page 4
ENGLISH PLACARD DEPENDENT CURL DEPENDENT CURL Adjust seat height so elbows align with orange pivot...
Page 5
ENGLISH ASSEMBLY Hardware Bolt (M10x80L) Hardware Flat Washer (M10) Nyloc Nut (M10) Bolt (M10x80L) Spring Washer (M10) Flat Washer (M10) Hex Bolt (M10x30L) Nyloc Nut (M10) Bolt (M10x150L) Spring Washer (M10) Arc Washer (M10) Bolt (M10x180L) Be sure to remove the insulating sheet when installing the rep counter.