Image Edge Fill tab
22
This option fills the edges of the final electronic image by covering the
area with the specified color. Image Edge Fill is performed after all other
image processing options have been applied.
Fill Color — allows you to select the color to fill the edges with.
• None
• White
• Black
• Automatic: the scanner will automatically fill the edges of the image
using the surrounding color.
• Automatic - include tears: in addition to filling the edges, the
scanner will also fill in tears along the edge of document.
When you select White or Black these options are available:
• If you check Frame Mode, an equal amount of the selected color
from the Image Edge Fill drop-down list will be filled in all on all sides
of the image.
• If you do not check Frame Mode, you can select a value in the Top,
Left, Right and/or Bottom area(s) from each side of the scanned
image to be filled.
NOTE: When using Image Edge Fill, be careful not to enter a value too
large as it could fill in image data that you want to keep.
A-61838/ISIS June 2015