Starting The Scan Validation Tool - Kodak i4x50 Series Scanner Setup Manual

Starting the Scan
Validation Tool
2
NOTE: The Scan Validation Tool is provided by Kodak Alaris and is a
diagnostic tool only. Kodak Alaris does not support the use of
the Scan Validation Tool as a scanning application.
1. Select Start>Programs>Kodak>Document Imaging>Scan
Validation Tool.
2. Select ISIS for the Driver Type and the KODAK Scanner i4250/
i4650/i4850 as the driver and click OK. The main Scan Validation
Tool window will be displayed.
3. Click the Setup icon. The Setup dialog box will be displayed.
A-61838/ISIS June 2015