Technical Assistance; Informations To The Consumers - eka KF 912 Use And Instruction Manual

Table of Contents

Advertisement

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
Replacing oven lamp
Replacing oven lamp
Replacing oven lamp - Electrically switch off the appliance; unscrew the protective glass cap
Replacing oven lamp
(Fig. 6);
(except MODD. KF 937 UD – KF 965 AL UD – KF 966 UD) unscrew the lamp and replace it
with another lamp suitable for high temperatures (300°C), with the following characteristics:
- Voltage
230/240 V
- Power
15 W
- Fitting
E 14
Refit the glass cap and power up the appliance.
(Only for the models KF 937 UD – KF 965 AL UD – KF 966 UD) remove the faulty halogen lamp
and insert the new one by using paper or cloth to not touch the lamp with bare hands.
Please note that the new halogen lamp must have the same characteristics as the one removed.
Put back the lamp cover with the gaskets and turn on the electricity.
11
11. . . . Technical
11
11
Technical
Technical

Technical assistance

assistance
assistance
assistance
Before leaving the factory, the appliance was completely regulated and tested by expert
specialised personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention, respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre, giving
details of the problem, the appliance model and the serial number (on the rating plate on the
rear panel).
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to
www.tecnoeka.com.
www.tecnoeka.com
www.tecnoeka.com
www.tecnoeka.com

1 1 1 1 2 2 2 2 . . . . Informations to the consumers

Informations to the consumers
Informations to the consumers
Informations to the consumers
Further to Directive 2002/96/EC, the symbol of the crossed rubbish skip on
the appliance means that at the end of its life, the product must be disposed
of separately from the other rubbish. The user must hand the appliance to a
specialised waste collection centre for electric and electronic equipment.
The separate collection of the rubbish and subsequent treatment, recovery and disposal help to
produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively, administrative sanctions would be applied.
_________________________________________________________________________________________ page 11 _
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
A
Fig. 7
Fig. 7
Fig. 7
Fig. 7
Fig. 8
Fig. 8
Fig. 8
Fig. 8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents