Additional Functions - Mitsubishi Electric DX-PC for View User Manual

NOTE: Motion Search is supported only in the single-screen mode.
 Record Period: Sets up the record period of images to search.
 Find Method: Selects a search method.
– Motion Search: Searches for images with changes in the Detection Area between two consecutive images
(for example, when there was movement).
– Museum Search: Searches for images with changes which last for the Activation Time in the Detection
Area when compared to the image displayed currently on the Search Screen (for example, when an object
disappears).
 Sensitivity: Sets the sensitivity of the change detection. The higher the number is, the more sensitive it is.
 Num of diff. block: Sets the minimum number of blocks that must be activated to be considered as a change
(Motion Search only).
 Diff. % to ref. image: Sets the minimum proportion (%) of blocks that must be activated to be considered
as a change (Museum Search only).
 Activation Time: Sets the duration that the change must last to be considered as a change (Museum Search
only). If a change is detected but does not last as long as the Activation Time, the change is not considered
as a change.

(Detection Area Select/Clear): Sets the detection area on the Search Screen by selecting or clearing
blocks.
 Search/Stop: Starts or stops searching. The last recorded image is displayed on the Search Screen.
 Next: Searching stops when the search results reach 100. Clicking the button continues searching.
 Reset: Resets the search condition.

4.3 Additional Functions

Save
Clicking the button on the toolbar saves the image currently displayed on the screen as a bitmap or JPEG
file. By placing a checkmark in the box beside Include Image Info, text information about the site will
be included when saving the image.
Remote Operation Software (DX-PC For View)
41