Introduction; Preparing To Use Network Features; Functions And Features; Operation Environment - Mitsubishi Electric LAN Control Utility User Manual

1. Introduction

1.1. Preparing to use network features

This projector is equipped with the network function to control and monitor the projector's operations and to
send e-mail notification.
Before using the network function, perform the following three preparation steps.
• Installing the ProjectorView Global+
• Assigning the projector IP address
The projector IP address, password, and certification can be configured in the projector menu. For more
information, see the section describing network settings provided in the projector's User Manual.

1.2. Functions and features

• 200 units of projectors can be remote-controlled at the maximum.
• Settings such as the IP address of the projector can be configured.
• You can register multiple projectors in a group and control them collectively.
• Various conditions of connected projectors can be monitored.
• Schedule of the power supply ON/OFF can be set every group.
• Schedule of the power supply ON/OFF can be set every day.
• When the communication with the projector monitored by the theft detector is disrupted, warning E-mail is
issued to the designated address.
• Message can be displayed on the screen of the operating projector. (Visual PA2 enabled projectors only)
• The projector is capable of reading aloud on-screen messages. (Text Speech enabled projectors only)

1.3. Operation environment

• Supported OS
Windows XP, Windows Vista
• CPU
Pentium II 233 MHz or higher (recommended)
• Memory
128 MB or more (recommended)
• Free HDD space
32 MB or more (recommended)
EN-2