Panic Recording - Mitsubishi Electric DX-PC for View User Manual

User's Manual
Print
Clicking the button on the toolbar prints the image currently displayed on the screen on a printer connected
to your computer. By placing a checkmark in the box beside Include Image Info, text information about
the site will be included when printing the image.
Screen Menu
Selecting a camera on the Watch or Search screen and clicking the right mouse button display the popup menu.
 Change Camera Title: Changes the camera name displayed on the screen. Leaving the Camera Title blank
causes the camera name set up on the remote site to display. Changing the camera title does not affect
the camera name set up on the remote site.
 Enable Audio: Enables audio communication with the remote site on the Watch screen (Two-way audio
equipped remote sites only). Plays audio while playing back recorded video that has recorded audio on
the Search screen. Refer to 4.1 Live Monitoring and 4.2 Playback and Search for more details.
 Aspect Ratio: Changes the image aspect ratio displayed on each camera screen.
– Fit to Screen: Displays images by fitting them to the screen size.
– Original Ratio: Displays images by fitting them within the screen size while maintaining their original ratio.
– Half Size (x0.5) to Quadruple Size (x4): Select the desired image size. Options are enabled when the
selected camera screen can display images in that size.
 Set Record Camera: Sets the selected camera channel to be recorded during panic recording. Refer to
3.3 Menu – System Menu for details on configuring camera channels for panic recording.
 Deinterlacing: Enhances image display quality of interlaced video on the screen by eliminating horizontal
scan lines or noise in areas with motion.
 Anti-Aliasing Screen: Enhances image display quality for all cameras on the screen by eliminating
stair-stepping (aliasing) effects in the enlarged image.
 Disconnect Camera: Disconnects a camera on the screen.
NOTE: When using a low-end computer, image drawing speed might decrease while using a deinterlace
filter depending on the type of deinterlace filter.
NOTE: When using a low-end computer, image drawing speed might decrease when the Anti-Aliasing
Screen option is selected.

4.4 Panic Recording

Clicking the button on the toolbar starts panic recording of cameras currently displayed on the Watch
screen. Clicking the button again stops panic recording. Up to 16 channels can be recorded at a time, and
you can select which cameras are to be recorded during the System setup. Clicking the
toolbar initiates the Record Player program and plays video saved in the recording folder designated during
the System setup. The Record Player GUI and its controls are almost identical to the Clip Player. Refer
to Appendix A – Reviewing Video Clips, Clip Player.
42
button on the