Table of Contents
Advertisement
User's Manual
If you want to send audio to the selected remote site, click the
you want to monitor live audio from the selected remote site through the attached speaker, click the
Clicking both
button and
audio communication.
If the remote DVR allows you to select an audio channel to monitor from the DX-PC
For View system, clicking the
box. Select a camera channel associated with an audio channel to monitor and click
the OK button.
Sequence Monitoring
Clicking the
button on the toolbar and selecting a desired Auto Sequencing group connects to the registered
sites sequentially allowing connection to more than one remote site and displays images from selected cameras.
Clicking the button during sequence monitoring releases sequence monitoring and maintains the current
connection. For sequence monitoring to function, the sequence sites should be registered during System
setup. Refer to 3.3 Menu – System Menu for details on configuring the sequence site.
NOTE: While in the sequence monitoring mode, you cannot manually connect to sites by dragging
and dropping with the mouse.
Color Control
NOTE: It is important that cameras are properly adjusted. These adjustments cannot make up for
improperly adjusted cameras when the images are recorded.
NOTE: Not all DVRs support the color control at DX-PC For View. Refer to the user manual of the
DVR.
PTZ Control
34
button allows two-way communication. Clicking the
button displays the Select Audio Channel dialog
① Brightness
Adjust the brightness, contrast, saturation and hue of live video for each camera by
clicking the target icons on the Color Control panel. Clicking the
the image processing operation and reloads the original image. Only the
administrator can adjust the image at DX-PC For View.
① Move buttons
④ Iris Close/Open
Select a PTZ camera at the remote site, and control pan, tilt and zoom. Only the
administrator can control PTZ at DX-PC For View. The
each camera screen when PTZ can be controlled remotely.
NOTE: Control features of the Advanced menu will be enabled when a camera
connected to a DVR supports PTZ features such as Speed, Auto Pan, Tour,
etc. and the DVR supports remote PTZ control. Depending on the specifications
of the PTZ camera, some features of the Advanced menu may not be active.
button and talk into the microphone. If
② Contrast
③ Saturation
② Zoom Out/In
⑤ View Preset/Set Preset
button.
button disables
④ Hue
⑤ Undo
icon cancels
③ Focus Near/Far
⑥ Advanced menu
icon will display on
Advertisement
Table of Contents
