Mitsubishi Electric DX-PC for View User Manual page 21

 Date/Time Format: Set the date/time format.
 Display Option: Set up the screen display, drag & drop popup option, display acceleration and OSD.
– Screen Option: Select Watch Screen to use the screen for live monitoring only, Search Screen to
use the screen for search only, or Watch and Search Screen to use the screen for both live monitoring
and searching. Selecting Hide the Message Box hides the message box that displays the status
information about DX-PC For View and remote site connections.
– Drag & Drop Popup Option: Select which mouse button will be used when displaying popup menu
screens from Use Left Mouse Button, Use Right Mouse Button or both (Watch and Search Screen
mode only).
– Drawing Mode Setup...: Set up the display options for the screen.
 Anti-Aliasing Screen: When using the option, the image display quality on the screen will be enhanced
by eliminating stair-stepping (aliasing) effects in the enlarged image.
 Use Slow Connection Draw Mode: When using the option in slow network environments such as ADSL
and connecting to a remote site in the live monitoring mode, the time taken to display the first image on
the screen will be reduced.
NOTE: If the image cannot be displayed properly because of your PC's specifications, lower the
drawing mode level.
NOTE: While in the Fast Drawing mode, the drawing speed might decrease when the DX-PC For View
screen is not located on the primary monitor.
NOTE: Overlay drawing mode may not be supported, depending on the type of video card installed
in your PC. Video cards with an ATI chipset are recommended.
NOTE: When using dual monitors, selecting Overlay drawing will display the image only on the
primary monitor.
NOTE: When using a low-end computer, image drawing speed might decrease while using a deinterlace
filter depending on the type of deinterlace filter.
NOTE: When using a low-end computer, image drawing speed might decrease when the Anti-Aliasing
Screen option is selected.
– OSD Setup...: Select options (Title, Time Info, Date Info, Text-In and Overlay Text-In Data) to display
on the screen.
– Load Default Map at Startup: Select whether or not the user-defined map file is loaded automatically
when DX-PC For View starts, and designate the path of the map file (.rmp) to load.
 Normal Drawing: Depends on your PC's CPU performance and
displays images in low speed (DIB Draw Mode).
 Fast Drawing (Default): Displays image in normal speed (Direct
Draw Mode).
 Fast Drawing (YUV420/RGB32): Depends on your PC's video
card performance and displays images in high speed (Direct
Draw Mode).
 Overlay (YUV420/RGB32/RGB565): Displays image in high
speed (Direct Draw Overlay Mode).
 Deinterlacing: Set up the deinterlace filter. Using a deinterlace
filter for interlaced video enhances image display quality by
eliminating horizontal scan lines and noise in areas with motion.
 Aspect Ratio: Set up the image aspect ratio displayed on the
screen. Selecting Fit to Screen displays images by fitting them
to the screen size, and selecting Original Ratio displays images
by fitting them within the screen size while maintaining their
original ratio.
Remote Operation Software (DX-PC For View)
17