Mitsubishi Electric DX-PC for View User Manual page 48

Remote operation software option for digital recorder
Table of Contents

Advertisement

User's Manual
NOTE: Refer to the manual for each applicable remote DVR for more details on system setup.
Remote System Log: Displays the system log information of the remote DVR connected to the Status
View panel.
Remote Event Log: Displays the event log information of the remote DVR connected to the Status
panel.
NOTE: Refer to 3.3 Menu – Remote Menu for more details on the Remote System Log and Remote
Event Log.
NOTE: When the remote site is not connected to the Status View panel, Remote Setup, Remote System
Log and Remote Event Log menus can be accessed by clicking the right mouse button after selecting
the remote site on the Remote Sites panel.
Remote Panic Control: Controls the panic recording of the remote DVR connected to the Status View
panel. The
On) button indicates that the remote DVR is not in the panic recording mode and you
(
can start panic recording by clicking the button. The
in the panic recording mode and you can stop panic recording by clicking the button.
NOTE: Remote Panic Control may not be supported, depending on the specifications and version
of the remote DVR.
Status Display Window
The Status Display Window displays the event, alarm out, system check and recording status information
of the remote system connected to the Status View panel in real-time.
NOTE: Depending on the specifications of the remote DVR, status display may not be supported.
 Event: Displays event (Motion Detection, Alarm In). The status display of event detection will continue
during the preset dwell time of the event-driven recording.
Event Detection
No Event Detection
Event Off
 Alarm Out: Displays status of the alarm-out signals.
Alarm-Out
 System Check: Displays the function status of the camera, alarm, and recording.
Normal
 Record From/To: Displays the record period.
 Status: Displays the recording, playback, archiving, clip-copy status.
On
 Version: Displays the system version information.
44
(Off) button indicates that the remote DVR is
No Alarm-Out
Irregular
Off
Alarm-Out Off
System Check Off

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents