Introduction; Preparing To Use Network Features; Functions And Features; Operation Environment - Mitsubishi Electric View Global+ User Manual

Table of Contents

Advertisement

1. Introduction

1.1. Preparing to use network features

This projector is equipped with the network function.
Before using the network function, perform the following 2 preparation steps.
• Installing the ProjectorView Global+
• Configuring the projector IP address, network password, and network certification settings
The projector IP address, network password, and network certification settings can be configured in the projector
menu. For more information, see the section describing network settings provided in the projector's User Manual.
<Note>
• It is recommended that you assign an IP address of the projector to the fixed IP address and set DHCP Function to
Off.
• Set the IP addresses, subnet masks, and default gateways of the projectors and computer correctly. For details,
contact your network administrator.
• Be sure to make a note of the IP addresses and default gateways you set. If you forget the setting values, you may
not be able to detect the projectors again.

1.2. Functions and features

ProjectorView Global+
• 200 units of projectors can be remote-controlled at the maximum.
• Settings such as the IP address of the projector can be configured.
• You can register multiple projectors in a group and control them collectively.
• Various conditions of connected projectors can be monitored.
• Schedule of the power supply ON/OFF can be set every group.
• Schedule of the power supply ON/OFF can be set every day.
• When the communication with the projector monitored by the theft detector is disrupted, warning E-mail is issued
to the designated address.
• Message can be displayed on the screen of the operating projector. (Visual PA2 enabled projectors only)
• The projector is capable of reading aloud on-screen messages. (Text Speech enabled projectors only)
Web UI
• Each projector can be controlled and monitored separately using a Web browser.
• When an error or warning occurs with the projector, you can check its details.

1.3. Operation environment

• Supported OS
Windows XP, Windows Vista and Windows 7 (Operation on a 64bit version of any operating system isn't
guaranteed.)
• CPU
Higher than the minimum specifications for the above operating systems to work
• Memory
More than the minimum specifications for the above operating systems to work
• Free HDD space
32 MB or more (recommended)
• Web browser (When using Web UI)
Internet Explorer Ver. 8.0 and Ver. 9.0 (recommended)
(To use this function, install Adobe Flash Player on your computer. Download Adobe Flash Player from the website
of Adobe Systems Incorporated.)
EN-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lan control utilityProjectorview global+

Table of Contents