IDEAL Logic+ Combi 24 Installation And Servicing page 23

18 fittinG tHe oPtionAl Roof flUe Kit (Flat or Pitched)
note.
A flat or pitched roof flashing plate (not supplied) is
required before proceeding with the installation of this kit.
This kit is suitable for both flat and pitched roof
terminations, using a concentric flue to
run vertically from the top of the boiler and
terminating above roof level.
Connection to the top of the boiler is made using
the supplied vertical connector.
WeAtHeR PRoofinG
Where the flue passes through the roof line an
adequate seal must be made. This is achieved
by using either:
- Flat roof weather collar
or
- Universal weather collar.
ACCeSSoRieS
Flue Duct Extension Kits are available for flue
lengths extending beyond 1m. These packs
contains 500mm, 1000mm and 2000mm extension
ducts and may be cut to the desired length.
If the offset vertical option is used an elbow Kit is
required.
For a full accessories list refer to page 9,
Optional Extras.
19 ROOF FLUE KIT CONTENTS / OPTIONS
Flue Terminal
UIN 211039
Vertical
Connector
Flue
duct
support
+
Ideal Logic Combi -
INSTALLATION
Flue Seal Collar - Flat Roof
UIN 152259
Flue Seal Collar - Tile Roof
UIN 152258
Installation and Servicing
Vertical connector
90
UIN 208175
UIN 203130
45 o elbow
UIN 203131
Roof Flue Extension Duct
UIN 211037 (500mm)
UIN 203129 (1000mm)
UIN 211038 (2000mm)
o elbow
Flue
duct
support
23