Replacing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the tabs on the touch pad into the slots on the palm rest and
keyboard assembly.
2
Align the screw holes on the touch pad with the screw holes on the palm
rest and keyboard assembly.
3
Replace the screws that secure the touch pad to the palm rest and
keyboard assembly.
4
Adhere the tapes to secure the screws to the touch pad.
5
Slide the touch-pad cable into the touch pad connector and press down
the latch to secure the cable.
Post-requisites
1
Replace the battery.
2
Replace the
base
58
computer. After working inside your
cover.
After working inside your