Replacing The Display Cable; Procedure; Post-Requisites - Dell Inspiron 11 3000 Series Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Route the display cable through the routing guides on the display bezel
and adhere the display cable on the display bezel.
2 Slide the display cable into the connector on the touch board and press
down the latch to secure the cable.
3 Slide the Windows-button board cable into the connector on the
Windows-button board and press down the latch to secure the cable.
4 Adhere the adhesive tape on the Windows-button board connector.

Post-requisites

1 Replace the camera.
2 Replace the display back-cover and antenna
3 Replace the display
4 Replace the battery.
5 Replace the base
96
computer. After working inside your
assembly.
cover.
After working inside your
assembly.