Replacing The Processor Fan And Heat-Sink Assembly; Procedure; Post-Requisites - Dell Inspiron 11 3000 Series Service Manual

Replacing the processor fan
and heat-sink assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the processor fan and heat-sink assembly with
the screw holes on the system board and place the processor fan and
heat sink assembly on it.
2 In sequential order, (indicated on the heat sink), tighten the captive
screws that secure the processor fan and heat-sink assembly to the
system board.
3 Connect the fan cable to the system board.

Post-requisites

1 Replace the battery.
2 Replace the base
computer. After working inside your
cover.
After working inside your
61