Replacing the eMMC I/O-
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw hole on the eMMC-I/O board with the screw hole on the
hard-drive assembly.
2
Replace the screw that secures the eMMC-I/O board to the hard-drive
assembly.
3
Turn the hard-drive assembly over and connect the interposer to the
hard-drive assembly.
Post-requisites
1
Replace the
eMMC
2
Replace the battery.
3
Replace the
base
38
computer. After working inside your
card.
cover.
After working inside your